01695 280510

01695 280510

GRP Profiles - Rods

Contact Us

Contact Us

GRP Rods are suitable for any structural project. Available in various sizes, lengths, colours and resins depending upon the application.
All our fiberglass/GRP rods are made from glass reinforced isophthalic polyester resin with a polyester surface veil. This combination gives excellent corrosion resistance and weatherability at an economic cost. Profiles in other resin systems are available to order. The standard BS EN 13706 Specification for pultruded profiles defines two grades of structural profiles. All Captrad's structural profiles with a wall thickness of over 5mm thick meet the higher performance E23 grade while those at 3-5mm wall meets the E17 grade 

GRP Rods

Fiberglass Rod Product range
The following Fiberglass rods are carried as stock items for immediate delivery.  Other diameters, lengths and colours can be supplied to order with a typical minimum production order of 300m, less for the large diameters.

grp rods

Conduit Rods

The range of conduit rods are essentially tools designed to assist feeding and installation of electrical cables and telecommunication lines through conduits either underground or at the customer premises.
The products vary in diameter and length pending flexibility and length required.
Common rod sizes include:

  • 4,5 mm OD @ 80 m suitable on small dispenser
  • 6,0 mm OD @ 125 m suitable on midi dispenser
  • 8,0 mm OD @ 125-150 m suitable on medium dispenser
  • 8,0 mm OD @ 200 m suitable on large dispenser
  • 10,0 mm OD @ 150-200 m suitable on large dispenser
  •